Aerobatics Server ACRO E-mail Archive Thread: [Acro] IFR certification for an S2-C [International Aerobatic Club] [Articles etc] [Communications] [Contest and Patch Information] [Aviation Organizations] [Other Aerobatics Info] [Aerobatics Images] [Other Aerobatics Links] [Other Aviation Info (including weather)] [Search ACRO Website] Disclaimer: These aerobatics pages are developed by individual IAC members and do not represent official IAC policy or opinion.

[Usage Statistics]

ACRO E-mail Archive Thread: [Acro] IFR certification for an S2-C

Thread: [Acro] IFR certification for an S2-C

Message: [Acro] IFR certification for an S2-C

Follow-Up To: ACRO Email list (for List Members only)

From: "Doug Carter" <douglcarter at hotmail.com>

Date: Fri, 02 Nov 2001 15:28:06 UTC

Message:

  I know it sounds nuts, but in order to have an escape route from the 
Washington ECB I'm considering adding an AI, DG, and TC gyros to my S2-C so 
I can file IFR with a straight face.

The R.C. Allen electrics might fit by increasing the panel depth about an 
inch (They are, I think 7" deep, possibly not counting the connector).

Is there an avionics shop in the D.C. area competent to do sheet metal mods 
to a panel like this?  Or, better yet, is there a smaller TSO'ed gyro set 
that the FSDO would buy off on for a certificated airplane?


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

If you have aerobatics related information that you would like to make available, please contact me at the email address below.
	Last Update: Fri May 4 13:13:02 2012
© Dr. Günther Eichhorn	Springer 233 Spring Street New York, NY 10013 USA, Email Guenther Eichhorn