Acro Image

Aerobatics Server

ACRO E-mail Archive Thread: [Acro] Re: S2A Cockpit panels

[International Aerobatic Club] [Communications] [Aerobatics Images]

Disclaimer: These aerobatics pages are developed by individual IAC members and do not represent official IAC policy or opinion.

[Usage Statistics]

ACRO E-mail Archive Thread: [Acro] Re: S2A Cockpit panels


Thread: [Acro] Re: S2A Cockpit panels

Message: [Acro] Re: S2A Cockpit panels

Follow-Up To: ACRO Email list (for List Members only)

From: "Chris Nehls" <Chris.Nehls at>

Date: Wed, 24 Apr 2002 17:17:58 UTC


Budd Davisson has done this to his S-2A that he uses for training.  If I recall, he said there was an STC for this mod. see for contact info.

Chris Nehls
  ----- Original Message ----- 
  From: Carol Moore & Rob Halas 
  To: HOOD.RM ; ACRO List 
  Sent: Monday, 22 April, 2002 09:29 PM
  Subject: [Acro] Re: S2A Cockpit panels

  Hi Richard

  We have a small company that does a lot of Pitts work and we did this for a fellow near Wenatchee Wa, his name is Craig Christopher and you might be able to find out from him what he had to do as we weren't involved in the paperwork aspect just the labor.

  All the best, Rob Halas
    ----- Original Message ----- 
    From: HOOD.RM 
    To: ACRO List 
    Sent: Monday, April 22, 2002 8:28 PM
    Subject: [Acro] S2A Cockpit panels

    A friend has asked if it is possible to replace the fabric on the side of the cockpit (up to behind the rear seat) with Ali panels?

    I did this a few years ago on an S1C so I know what is involved as far as the physical work goes, but has anyone done it on a certified S2A?

    Richard Hood
    S1 ZK-EES

Attachement 1: part2.html


© Dr. Günther Eichhorn
Email Guenther Eichhorn