Acro Image

Aerobatics Server

ACRO E-mail Archive Thread: Pitts S1S parts for sale

[International Aerobatic Club] [Communications] [Aerobatics Images]

Disclaimer: These aerobatics pages are developed by individual IAC members and do not represent official IAC policy or opinion.

[Usage Statistics]

ACRO E-mail Archive Thread: Pitts S1S parts for sale


Thread: Pitts S1S parts for sale

Message: Pitts S1S parts for sale

Follow-Up To: ACRO Email list (for List Members only)

From: FJensen210 at

Date: Mon, 10 Feb 1997 18:39:34 UTC


I am parting out my Pitts S1S, and am offering it in three lots only.  Am
unable to piece it out further. I have owned this airplane for the last 500
hours/ten years, and flown it to advanced level only.  

Engine, IO360B4A  -- fuel injected 180hp.  Hours 640 TTSN.  Sensenich 58"
pitch polished prop and 14" polished spinner.  B&C lightweight starter.  Sky
Dynamics magnesium sump and four into one exhaust.  Christen inverted system.

Falcon wings.  190 total hours, completed in 1991.  Red/White/Black, covered
in 1/16" mahogany.  Includes wing tank (with flop tube),I-struts, slave
struts, flying wires and all other hardware necessary to bolt on to an S1
fuselage and go fly.  $8000.

Fuselage assembly.  Hours 640 TT.  Built in 1974.  With large rudder,
extensive lexan paneling, Hooker Harness, Haigh tailwheel.  Standard Pitts
landing gear.  Includes all cowling, instruments, etc.  $7000.

For a quick sale, I am also offering the complete airplane for $25K firm.
 Fly it home.  Airplane is hangared at Ramona Airport  San Diego County,

If interested, please telephone.  Do not E-Mail, I am shutting down this AOL

Finn Jensen
(619) 549-3461, days or eves


© Dr. Günther Eichhorn
Email Guenther Eichhorn